Design of Concrete Structures Mcqs
This set of Civil Engineering Multiple Choice Questions & Answers (MCQs) focuses on “ Design of Concrete Structures ”. These Mcqs are chosen from a collection of most authoritative and best reference books on Civil Engineering. Our aim is to prepare an individual for competitive exams like NTS, GAT, ECAT, University and College entrance exams, Jobs and interviews. One should practice our MCQS to assimilate Design of Concrete Structures comprehensively.
2. The relation between modulus of rupturefcr and characteristic strength of concrete fck is given by_______________?
Fcr=0.35Vf7
Fcr=0.57f7
Fcr=0.7Vf7
Fcr=1.2Vf7
Answer & Solution
No Solution for this Answer..! Report or Discus this Question
3. The approximate value of the ratio between direct tensile strength and flexural strength is_____________?
0.33
0.5
0.75
1.0
4. Air entrainment in the concrete increases________________?
Workability
Strength
The effects of temperature variations
The unit weight
Answer & Solution
No Solution for this Answer..! Report or Discus this Question
5. Workability of concrete is inversely pro¬portional to______________?
Time of transit
The air in the mix
Size of aggregate
Answer & Solution
No Solution for this Answer..! Report or Discus this Question
6. The property of fresh concrete, in which the water in the mix tends to rise to the surface while placing and compacting, is called________________?
Segregation
Bleeding
Bulking
Creep
Answer & Solution
No Solution for this Answer..! Report or Discus this Question
7. To determine the modulus of rupture, the size of test specimen used is_______________?
150 x150 x500 mm
100 x100 x700 mm
150 x150 x700 mm
100 x100 x500 mm
Answer & Solution
No Solution for this Answer..! Report or Discus this Question
8. The percentage of voids in cement is approximately_______________?
25%
40%
60%
80%
9. Modulus of rupture of concrete is a measure of_______________?
Flexural tensile strength
Direct tensile strength
Compressive strength
Split tensile strength
Answer & Solution
No Solution for this Answer..! Report or Discus this Question
10. In order to obtain the best workability of concrete, the preferred shape of aggregate is_______________?
Rounded
Elongated
Angular
All of the above
11. As compared to ordinary portland cement, high alumina cement has______________?
Higher initial setting time but lower final setting time
Lower initial setting time but higher final setting time
Higher initial and final setting times
Lower initial and final setting times
Answer & Solution
No Solution for this Answer..! Report or Discus this Question
12. Bulking of sand is maximum if moisture content is about____________?
2 %
4%
6%
10%
13. 1% of voids in a concrete mix would reduce its strength by about______________?
5%
10 %
15%
20%
14. Finer grinding of cement______________?
Affects only the early development of strength
Affects only the ultimate strength
Both (A. and (B.
Does not affect the strength
Answer & Solution
No Solution for this Answer..! Report or Discus this Question
15. Poisson’s ratio for concrete_______________?
Remains constant
Increases with richer mixes
Decreases with richer mixes
None of the above
Answer & Solution
No Solution for this Answer..! Report or Discus this Question